Heat Pump Calculator

Calculate heat pump size and savings vs gas furnace, electric, or oil heating.

By Konstantin Iakovlev · Updated October 2026 · Source: ENERGY STAR — Air-Source Heat Pumps; EIA residential energy prices · Methodology

$
$

Extra Cost per Year

$119.75

Installed Cost

$15,000.00

Payback

No payback: no savings

The 30% federal credit for heat pumps (Section 25C, capped at $2,000) expired December 31, 2025 under the One Big Beautiful Bill Act. Equipment placed in service in 2026 does not qualify — the IRS looks at the install date, not the purchase or contract date. State and utility rebates may still apply and are often substantial; check your state energy office and your utility.

Heat Pump Analysis

Recommended Size3.3 tons
Assumed EfficiencyHSPF2 9.2 (seasonal COP 2.7)
Heat Needed per Year38.7 million BTU
Install Cost$15,000.00
Total Cost$15,000.00
Current Gas Furnace Cost$636.40/yr
Heat Pump Annual Cost$756.15/yr

At average U.S. prices a heat pump usually costs about the same as or a little more than a gas furnace to run, and far less than electric resistance or oil heat; it also replaces the air conditioner. Heating only: cooling savings are not included.

Use the Heat Pump Calculator above to calculate your results. Enter your values and see instant results — all calculations run in your browser.

Disclaimer: This calculator is for informational purposes only. Results are estimates from the numbers you enter and the assumptions described on this page; check them against local building codes, product specifications and current prices, and have structural, electrical or gas work designed or checked by a licensed professional.

How It Works

A heat pump replaces a furnace with an electric system that moves heat instead of making it, and it cools in summer too. This calculator sizes a system for your home, estimates its installed price and compares its yearly running cost with your current heating, so you can see how long the switch takes to pay back now that the federal tax credit has ended.

Size is about one ton of capacity per 600 square feet, 30% more in a cold climate and 10% less in a hot one, at an installed price of about $4,500 a ton. Running costs come from the heat the house needs, assumed at 38.7 million BTU a year for 2,000 sq ft in a moderate climate and scaled by floor area and climate, divided by each system's efficiency and priced at what its fuel costs: a 90% gas furnace at $1.48 a therm (EIA's 2025 residential average), an 85% oil furnace at $6.14 a gallon (EIA, October 12, 2026), electric resistance and the heat pump at 18 cents a kWh. The heat pump's seasonal efficiency (COP) is 2.7 in a moderate climate, 2.3 for a cold-climate unit in the North and 3.0 in the South; you can enter your own fuel and electricity prices.

Local prices move the answer more than anything else: where electricity is expensive and gas is cheap, savings over a gas furnace are thin, while replacing oil or electric resistance heat usually pays back far sooner. The 25C credit of up to $2,000 ended for systems placed in service after December 31, 2025. Income-qualified households may still get a federal heat pump rebate of up to $8,000 through state programs under the Inflation Reduction Act where funds remain, and many utilities offer rebates; the tool does not subtract them.

Example: Replacing an Oil Furnace with a Heat Pump

  1. 1 A 2,000 sq ft home in a moderate climate is heated by an oil furnace.
  2. 2 The tool sizes a 3.3-ton heat pump (2,000 / 600) at about $15,000 installed.
  3. 3 Heating with oil takes about 329 gallons a year at $6.14, about $2,018, against about $756 of electricity for the heat pump, a saving of about $1,262 a year.
  4. 4 Payback is about 11.9 years ($15,000 / $1,262). The same home switching from a gas furnace would pay about $120 a year more for heat ($756 against $636), so there is no payback on heating alone, which is why the fuel you replace matters most.

Frequently Asked Questions

How much does a heat pump cost to install?
Quotes vary widely with size, efficiency and ductwork. This calculator assumes about $4,500 per ton installed, so a typical 3-ton air-source system comes to about $13,500; ground-source (geothermal) systems commonly run $20,000 to $50,000 or more (HomeGuide, October 2025). The federal credits that used to offset this — 25C (up to $2,000 for air-source) and 25D (30% with no cap for geothermal) — expired December 31, 2025, so 2026 installs rely on state and utility incentives.
How much can a heat pump save compared to a gas furnace?
A heat pump moves heat instead of burning fuel, delivering about 2.2 to 3 units of heat per unit of electricity over a season. At average U.S. prices ($1.48 a therm for gas, 18 cents a kWh) that is slightly more expensive heat than a 90% gas furnace: in this calculator a 2,000 sq ft home in a moderate climate pays about $756 a year with a heat pump against $636 with gas, while it saves about $1,262 a year against oil and $1,285 against electric resistance. Cheaper electricity or pricier gas tips the balance. In very cold climates, a dual-fuel system (heat pump plus gas backup) is often optimal.
Do heat pumps work in cold climates?
Yes. ENERGY STAR tests certified cold-climate air-source heat pumps down to 5°F; they keep working below that, and in even colder weather pairing one with a backup heat source heats the home most efficiently. This calculator uses a seasonal COP of 2.3 in a cold climate against 2.7 in a moderate one.